While your kitchen design may require help from the professionals, installation can be a DIY job, potentially saving you lots of money. Here are ten useful installation tips to help with your kitchen cabinets.
Installation Tip # 1 – Examine the cabinets
When it comes to ordering kitchen cabinets, mistakes sometimes happen. Errors can be found by spending a few minutes before you begin installing them. The last thing you want is to find out you are missing a middle cabinet or the wall units do not have the same walnut coloring. Check the product before you begin the construction.
Installation Tip # 2 – Removing the old kitchen cabinets
Before you install your new kitchen cabinets, you will need to remove the old ones. While it may seem appealing and an easy way to get rid of some frustration, you should resist the urge to rip them out. Spend a few minutes to remove them properly. Not only will you save some money in unwanted damage, you may find another use for them.
Installation Tip # 3 – Construct a layout
Precision is key every time you are installing kitchen cabinets. You want to make sure you have the plans don correct before you begin the actual process. Set out the cabinets where they are supposed to be so you have a visual for the project. Who knows, maybe something will come to you and you will need to change your plans.
Installation Tip # 4 – Locating the high spot on the floor
While we would like out new kitchen cabinets to be level, we need to realize our kitchen walls and floors are anything but perfect. This is why you need to locate the high spot on the floor so you can adjust accordingly.
To accomplish this, use a straight 2 x 4 and set it on the floor, flush to the wall. Place a four foot level on top and raise the 2 x 4 until you things level off. Draw a line on the wall and continue it around where the kitchen cabinets will be installed. Find the spot on the line where there is the shortest distance from the floor to the line. This is your high spot and will be used as a starting spot for your cabinets.
Installation Tip # 5 – Know the top and base of your cabinets
Using the high point line, you will need to measure up 34 1/2 inches, which is the standard height for kitchen cabinets, and extend the line around the work area. Create a base line the same way, using the bottom lip of the cabinets as the marking point. These lines will help let you know the leveling spot when you are securing the cabinets.
Installation Tip # 6 – Locate your studs
The last step before you start installing is to find the studs in the work area. You will need to secure your kitchen cabinets to the studs to make sure you do not have future problems. While you can do it with a simple knock every inch, you can save yourself some frustration by picking up a stud finder at your local hardware store for $15 to $20.
Installation Tip # 7 – Corners cabinets come first
When it comes to installing kitchen cabinets, there are two times when you do not start using the high spot. One of them is when you are working with a corner cabinet. This cabinet will be a starting spot for your new kitchen, so makes sure you take your time and install it right.
Installation Tip # 8 – Wall cabinets take priority
The other time when you do not use the high spot to start your cabinets is when wall kitchen cabinets are involved. You will find it easier to move around if your base cabinets are not in place. Make sure to remove any of the cabinet doors and drawers on the wall unit prior to installation, it will be much lighter for you.
Installation Tip # 9 – Proper use of shims
While the shim may seem unimpressive and mundane, it plays an important role for your kitchen cabinets. The shim will raise and alter the foundation of your cabinet, making sure the countertop is level. Make sure to use them as needed because it is too difficult to go back and add them later.
Installation Tip # 10 – The last finishing touch for your kitchen cabinets is to apply a thin line of caulking along the top of the counter top where it meets the wall.
You can choose to go with the standard paintable caulk or choose a clear silicone caulk. While the silicon is slight more expensive, about $ 2 more per tube, it does offer more resistance to mold and bacteria forming, which is important in a kitchen area.